Product description

Function: Suitable for aluminum foil tape strip.

Gauge:

Mechanical width: 1.0M/1.3M/1.6M

Maximum feeding diameter: 800㎜

Maximum mechanical speed: 180M/min

Minimum strip width: 12㎜

Maximum winding diameter: four axes exchange 180㎜

Coil core diameter: 26-77 ㎜(1 "core can only be suitable for 1.3M or less)

Equipment features:

1. Discharge and winding are split type, discharge diameter is larger, easy operation.

2. The material is rolled out with a surface press wheel device, which can make the rolled out material smoother.

3. The slitter tool adopts the upper and lower round knife, which is suitable for slitter of aluminum foil tape.

4. Power using a motor with two-stage length counter, stable and accurate shutdown.

5. The winding tension is controlled by the magnetic powder clutch (the old model is a butterfly spring), with individual sliding winding, the material thickness is not good, it can be automatically adjusted, and the tension of all finished products is average.

6. The production is equipped with a paper tube loader, which can unload the finished product and load the paper tube at the same time to achieve consistent operation.

7. Waste coiling adopts servo control center line type coiling, reducing refuelling times and saving time.

Optional equipment introduction:

1. Paper tube loading and unloading aluminum mold: It must be purchased when producing different widths, and the size can be specified according to demand

2. Hydraulic feeding machine: fast feeding and manpower saving.

3. Automatic labeling device: This device will automatically paste the end paper in operation to achieve the maximum production capacity of the machine.

4. Roll out muffler: the noise can be reduced to achieve an ideal environment when the material is rolled out.

5. Air knife slitting device: This function can improve the use of paper or cloth tape.

6. Bin mixing device: the addition of this function can save the trouble of manual paper tube.

7. Winding independent mechanism: Select this structure can make the original four axes linkage become only the two axes of winding operation operate separately, saving loading and unloading time.